Selling Online Since 1996!

844-420-4100

Phone Orders Welcome

Technical Support

Free Design Service!

1/4" tubing is used extensively in drip systems to run from a larger mainline to individual plants or group of plants where it may be branched off again. All of our fittings listed as 1/4" will work with any tubing listed as 1/4".

1/4" tubing comes in poly or vinyl and many different lengths.

 Note: When connecting 1/4" tubing to 1/2" poly you need a 1/4" Barb or 1/4" Tee. (Just saying......Oh, and the punch!)

10 Item(s)

  • T036

    3,000' x 1/4 Inch Poly Micro Tubing .170 ID X .250 OD

    Regular Price:

    $125.00

    This is a 3,000 Ft. Coil of 1/4" (.170 ID X .250 OD) Poly MicroTube.
    This tubing is used to extend off the main 1/2" or larger Poly tube to individual plants and may either have a dripper installed on the end or connect to 1/4" Drip Line. Use any 1/4" fittings with this tube.
    This Poly tube is easier to install 1/4" fittings into but will not bend as sharply as Vinyl. If bent too sharp it may kink closing off water flow.

    • Maximum Flow for this tubing is 30 GPH
    • Maximum total line length for this tubing is 30 Ft.
    • You can place drippers directly into the end of this tubing.
    • Any of our fittings designated as 1/4" will work with this tubing

    Please be aware that shipping of the coils can be expensive due to their size and weight.

  • T042

    1,000' x 1/4 Inch Poly Micro Tubing .170 ID X .250 OD

    Regular Price:

    $45.00

    This is a 1,000 Ft. Coil of 1/4" (.250 OD) Poly MicroTube.
    This tubing is used to extend off the main 1/2" or larger Poly tube to individual plants and may either have a dripper installed on the end or connect to 1/4" Drip Line. Use any 1/4" fittings with this tube.
    This Poly tube is easier to install 1/4" fittings into but will not bend as sharply as Vinyl. If bent too sharp it may kink closing off water flow.

    • Maximum Flow for this tubing is 30 GPH
    • Maximum total line length for this tubing is 30 Ft.
    • You can place drippers directly into the end of this tubing.
    • Any of our fittings designated as 1/4" will work with this tubing

  • T041

    500' x 1/4 Inch Poly Micro Tubing .170 ID X .250 OD

    Regular Price:

    $25.00

    This is a 500 Ft. Coil of 1/4" (.250 OD) Poly MicroTube.
    This tubing is used to extend off the main 1/2" or larger Poly tube to individual plants and may either have a dripper installed on the end or connect to 1/4" Drip Line. Use any 1/4" fittings with this tube.
    This Poly tube is easier to install 1/4" fittings into but will not bend as sharply as Vinyl. If bent too sharp it may kink closing off water flow.

    • Maximum Flow for this tubing is 30 GPH
    • Maximum total line length for this tubing is 30 Ft.
    • You can place drippers directly into the end of this tubing.
    • Any of our fittings designated as 1/4" will work with this tubing
  • T040

    100' x 1/4 Inch Poly Micro Tubing .170 ID X .250 OD

    Regular Price:

    $6.50

    This is a 100 Ft. Coil of 1/4" (.250 OD) Poly MicroTube.
    This tubing is used to extend off the main 1/2" or larger Poly tube to individual plants and may either have a dripper installed on the end or connect to 1/4" Drip Line. Use any 1/4" fittings with this tube.
    This Poly tube is easier to install 1/4" fittings into but will not bend as sharply as Vinyl. If bent too sharp it may kink closing off water flow.

    • Maximum Flow for this tubing is 30 GPH
    • Maximum total line length for this tubing is 30 Ft.
    • You can place drippers directly into the end of this tubing.
    • Any of our fittings designated as 1/4" will work with this tubing
  • T010

    100' x 1/4 Inch Brown Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $7.25

    This is a 50 Ft. Coil of Brown 1/4" (.245 OD) Vinyl MicroTube.
    This tubing is used to extend off the main 1/2" or larger Poly tube to individual plans and may either have a dripper installed on the end or connect to 1/4" Drip Line. Use any 1/4" fittings with this tube.
    This Vinyl tube is softer and bends easier than the 1/4" Poly Microtube.

    • Maximum Flow for this tubing is 30 GPH
    • Maximum total line length for this tubing is 30 Ft.
    • You can place drippers directly into the end of this tubing.
    • Any of our fittings designated as 1/4" will work with this tubing
  • T009

    50' - 1/4 Inch Black Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $4.00

    50' - 1/4 Inch Black Vinyl Micro Tubing .156 I.D. X .245 OD

    This 1/4" micro tube is made of a Vinyl material and is easy to work with. We like using this for the ease of installing and how the material conforms to new shapes as you install it. Warm it a little in the sun and it's even easier to work with.

    Any of our 1/4" fittings will work with this tubing as will any stakes listed as 1/4". Drippers with barbs will fit right into the end of this tubing and microsprinklers with a 10/32 thread work also.

    If you are installing more than a handful of 1/4" fittings we suggest getting our 1/4" barb insert tool model A034

  • T028

    100' - 1/4 Inch Black Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $7.00

    100' - 1/4 Inch Black Vinyl Micro Tubing .156 I.D. X .245 OD

    This 1/4" micro tube is made of a Vinyl material and is easy to work with. We like using this for the ease of installing and how the material conforms to new shapes as you install it. Warm it a little in the sun and it's even easier to work with.

    Any of our 1/4" fittings will work with this tubing as will any stakes listed as 1/4". Drippers with barbs will fit right into the end of this tubing and microsprinklers with a 10/32 thread work also.

    If you are installing more than a handful of 1/4" fittings we suggest getting our 1/4" barb insert tool model A034

  • T011

    500' - 1/4 Inch Black Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $33.00

    500' - 1/4 Inch Black Vinyl Micro Tubing .156 I.D. X .245 OD

    This 1/4" micro tube is made of a Vinyl material and is easy to work with. We like using this for the ease of installing and how the material conforms to new shapes as you install it. Warm it a little in the sun and it's even easier to work with.

    Any of our 1/4" fittings will work with this tubing as will any stakes listed as 1/4". Drippers with barbs will fit right into the end of this tubing and microsprinklers with a 10/32 thread work also.

    If you are installing more than a handful of 1/4" fittings we suggest getting our 1/4" barb insert tool model A034

  • T039

    1,000' - 1/4 Inch Black Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $62.00

    1,000' - 1/4 Inch Black Vinyl Micro Tubing .156 I.D. X .245 OD

    This 1/4" micro tube is made of a Vinyl material and is easy to work with. We like using this for the ease of installing and how the material conforms to new shapes as you install it. Warm it a little in the sun and it's even easier to work with.

    Any of our 1/4" fittings will work with this tubing as will any stakes listed as 1/4". Drippers with barbs will fit right into the end of this tubing and microsprinklers with a 10/32 thread work also.

    If you are installing more than a handful of 1/4" fittings we suggest getting our 1/4" barb insert tool model A034

  • T021

    3,000' - 1/4 Inch Black Vinyl Micro Tubing .156 ID X .245 OD

    Regular Price:

    $155.00

    3,000' - 1/4 Inch Black Vinyl Micro Tubing .156 I.D. X .245 OD

    This 1/4" micro tube is made of a Vinyl material and is easy to work with. We like using this for the ease of installing and how the material conforms to new shapes as you install it. Warm it a little in the sun and it's even easier to work with.

    Any of our 1/4" fittings will work with this tubing as will any stakes listed as 1/4". Drippers with barbs will fit right into the end of this tubing and microsprinklers with a 10/32 thread work also.

    If you are installing more than a handful of 1/4" fittings we suggest getting our 1/4" barb insert tool model A034

10 Item(s)