Selling Online Since 1996!

844-420-4100

Phone Orders Welcome

Technical Support

Free Design Service!

12 Outlet

Filters
Manufacturer
  1. DIG Corp. (5)

We offer a great 12 outlet manifold that can use 1/4" or 1/8" tubing, in fact you can even have different flow rates or close off ANY of the outlets! How cool is that? 

Check out the accessory section for all the replacement and additional items available.

6 Item(s)

  • D059

    .6 GPH 12-Outlet PC Drip Manifold, 1/2" FPT

    Regular Price:

    $6.77 As low as: $6.35

    .6 GPH 12-Outlet PC Drip Manifold with 1/2" Female Pipe Thread inlet.

    Connects to any 1/2" FPT sprinkler riser.

    Use this 12 outlet manifold on top of a new or existing 1/2" sprinkler riser. You get .5 GPH out of each outlet from a Pressure Compensating dripper for exceptional flow control.
    Fantastic for multiple small pots grouped together. Run 1/8" microtube from the manifold outlet to a stake inside each pot. With the higher flow manifolds you can install the converter barbs into the outlets for use with 1/4" tubing.
    With all flow rates you can split the 1/8" tubing to multiple plants using the GD-000 Flow Stabilizing stake. This stake regulates the flow so even past the pressure compensating outlet each plant will get equal water.

    There are so many ways to use these manifolds it's really incredible!

    Check the Description tab below for more information.

  • D071

    1 GPH 12-Outlet PC Drip Manifold, 1/2" FPT

    Regular Price:

    $6.77 As low as: $6.35

    1 GPH 12-Outlet PC Drip Manifold with 1/2" Female Pipe Thread inlet.

    Connects to any 1/2" FPT sprinkler riser.

    Use this 12 outlet manifold on top of a new or existing 1/2" sprinkler riser. You get 1 GPH out of each outlet from a Pressure Compensating dripper for exceptional flow control.
    Fantastic for multiple small pots grouped together. Run 1/8" microtube from the manifold outlet to a stake inside each pot. With the higher flow manifolds you can install the converter barbs into the outlets for use with 1/4" tubing.
    With all flow rates you can split the 1/8" tubing to multiple plants using the GD-000 Flow Stabilizing stake. This stake regulates the flow so even past the pressure compensating outlet each plant will get equal water.

    There are so many ways to use these manifolds it's really incredible!

    Check the Description tab below for more information.

  • D072

    2.2 GPH 12-Outlet PC Drip Manifold, 1/2" FPT

    Regular Price:

    $6.77 As low as: $6.35

    2.2 GPH 12-Outlet PC Drip Manifold with 1/2" Female Pipe Thread inlet.

    Connects to any 1/2" FPT sprinkler riser.

    Use this 12 outlet manifold on top of a new or existing 1/2" sprinkler riser. You get 2.2 GPH out of each outlet from a Pressure Compensating dripper for exceptional flow control.
    Fantastic for multiple small pots grouped together. Run 1/8" microtube from the manifold outlet to a stake inside each pot. With the higher flow manifolds you can install the converter barbs into the outlets for use with 1/4" tubing.
    With all flow rates you can split the 1/8" tubing to multiple plants using the GD-000 Flow Stabilizing stake. This stake regulates the flow so even past the pressure compensating outlet each plant will get equal water.

    There are so many ways to use these manifolds it's really incredible!

    Check the Description tab below for more information.

  • D073

    3.3 GPH 12-Outlet PC Drip Manifold, 1/2" FPT

    Regular Price:

    $6.77 As low as: $6.35

    3.3 GPH 12-Outlet PC Drip Manifold with 1/2" Female Pipe Thread inlet.

    Connects to any 1/2" FPT sprinkler riser.

    Use this 12 outlet manifold on top of a new or existing 1/2" sprinkler riser. You get 3.3 GPH out of each outlet from a Pressure Compensating dripper for exceptional flow control.
    Fantastic for multiple small pots grouped together. Run 1/8" microtube from the manifold outlet to a stake inside each pot. With the higher flow manifolds you can install the converter barbs into the outlets for use with 1/4" tubing.
    With all flow rates you can split the 1/8" tubing to multiple plants using the GD-000 Flow Stabilizing stake. This stake regulates the flow so even past the pressure compensating outlet each plant will get equal water.

    There are so many ways to use these manifolds it's really incredible!

    Check the Description tab below for more information.

  • D061

    12 outlet Body Assembly Only

    Regular Price:

    $4.85 As low as: $4.50

    This is the 12 outlet BODY ONLY! It has no drippers installed in it.

    We have listed the drippers below that you may install yourself. Mix and match the flow rates for what you need.

    D066 - .6 GPH
    D067 - 1 GPH
    D068 - 2.2 GPH
    D069 - 3.3 GPH

  • GD-000

    6" Flow Stabilizer Stake for 1/8" microtube

    Regular Price:

    $0.16 As low as: $0.14
    6" Flow Stabilizer Stake for 1/8" microtube.

6 Item(s)