Regular Price: $1.77$1.77
When installing an irrigation system using PVC threaded fittings you should use two or three wraps of this teflon tape on the male ends. Not only does it help seal against any water leaks it allows for a smooth threading together of parts. Even better it lets you UNscrew parts if needed, now and in the future! If you think we are kidding try for yourself and test with and without................told you! :-)
Regular Price: $7.47$7.47
If you have a sharp pair of garden pruners they work OK and a utility knife works OK but this cutter works GREAT! Really, it's small, fits in your pocket and it's quick. What more do you need? Best part is when it's closed it has no sharp edges exposed so shoving it in your pocket is safe.
Regular Price: $1.79$1.79
Palm Hole Punch For 1/4" Barbs
Use this punch to make holes for anything with a 1/4" barb.
If you are doing a large amount of holes then consider the A035 Pro Punch Gun. The A035 even has a replacable tip. If your tip does become dull or dirty use a small piece of 220 grit or finer sandpaper and hold it around the tip while twisting the punch. That normally sharpens it up and will increase the life of the metal tip.
Regular Price: $14.50$14.50
Professional Gun Punch for 1/2" and 3/4" Poly tube
Punching holes in 1/2" and 3/4" tubing has never been easier than this. If you have lots of holes just get this and thank us by sending Apple pie!
Even better is we carry replacement tips and tips in different sizes for other products which call for larger holes.
Regular Price: $19.50$19.50
Professional Barb Insert Clip Gun
Works with our SF001 1/4" barb listed below left in the "Related Products" section.
THIS IS IT!!! If you need to insert 1/4" barbs into 1/4" microtube BUY THIS!! We played around with this thing and everybody just wanted to keep inserting barbs into tubing. None of us will ever again try to push barbs into microtube by hand! The caveman days are over!