Netafim 1" AC Solenoid Globe Valve, Series 80 with flow control
- RELATED PRODUCTS
- DESCRIPTION
- SPECIFICATIONS
- FEATURES
- REVIEWS
Easiest Operation And Lowest Maintenance Costs
New and improved manual selector allows for hassle-free internal bleed without manipulating the position of the solenoid. Innovative labyrinth inlet eliminates the need for internal filters, reducing service costs for end users, contractors and Distributors.
Flow Control Standard On All Models
Manual zone control from fully closed to maximum capacity at no extra charge
High Efficiency, Longer Lasting Solenoid
Inrush and holding current are 50-60% lower than the industry average which allows the industry’s longest wire runs from valve to controller. Low sensitivity to dirt and voltage fluctuations.
Specification Specifications
Recommended flow range:
- ¾” – 0.01 to 26 GPM
- 1” – 0.01 to 44 GPM
- 1 ½” – 0.25 to 110 GPM
- 2“ – 0.25 to 176 GPM
- Minimum operating pressure: 7 psi
- Maximum operating pressure: 150 psi
- Water temperature: up to 140° F
- Improved manual selector and encapsulated solenoid available on 3/4” and 1“ models only
- 24VAC solenoid standard +/- 10% voltage
- Solenoid inrush current: 0.220A
- Solenoid holding current: 0.095A
- Optional Solenoids: 24VDC, 12VDC, 12VDC-latching and 120VAC
- Integral stainless steel EasyClean® filter for 1½” and 2” models only
- Adjustable pressure regulator option available: 1.5″ and 2″ model
- Normally Closed Option: 3/4″ – 2″
- Normally Open Option: 1 1/2″ – 2″
Materials
- Body, bonnet, and glass reinforced polyamide (GRP)
- Diaphragm: Buna-N rubber
- Nuts, bolts and washers: stainless steel 304
- Spring: stainless steel AISI 302
Features Features & Benefits
- Easiest Operation And Lowest Maintenance Costs
- New and improved manual selector allows for hassle-free internal bleed without manipulating the position of the solenoid. Innovative labyrinth inlet eliminates the need for internal filters, reducing service costs for end users, contractors and Distributors.
- Flow Control Standard On All Models
- Manual zone control from fully closed to maximum capacity at no extra charge
- High Efficiency, Longer Lasting Solenoid
- Inrush and holding current are 50-60% lower than the industry average which allows the industry’s longest wire runs from valve to controller. Low sensitivity to dirt and voltage fluctuations.
- Proven Reliability with Reclaimed Water
- Over a decade of field-proven, consistent performance under the harshest water conditions. Durable and corrosion-resistant materials.
- 2-Wire System Compatibility
- Works with all major manufacturer 2-Wire control systems.
Applications
- Residential or commercial landscape irrigation applications
- For mild corrosive and mild acidity levels in the water
- For remote control, master valve, automated operations
- Reclaimed/reuse applications including municipally treated reclaimed water designated for irrigation
