The 3/4", 1” or 2” coupling connectors with ball valves are the standard accessories for connecting the applicator to the corresponding size PVC pipe provided. The coupling can be installed into a PVC line of the irrigation system using one of three different connection options (which are sold separately as they must be matched to each specific pipe size and also to ensure proper flow control).
The slip coupling connectors are used to connect the EZ-FLO system to the irrigation PVC pipe after the valve using the 1/4" flexible tubing provided with every system. The assembly includes a schedule 40 PVC slip coupler with pre-inserted threaded blue and green barb connectors in specific spacing. Install this connector to an existing or new 3/4", 1" or 2” PVC pipe.
By far the most popular connection type for the EZ-FLO system is the standard slip coupling connection. These standard coupling connections can be used in new installations or in retrofits where there is adequate room to add the coupling to the irrigation pipe.
Do not install system into an irrigation main line before a zone valve. Do not
install or leave system under constant pressure (with water on and no flow out
of your garden hose or drip system) or if pressure exceeds 60 PSI. Flush hose
after each use to vent chemicals and pressure. Empty tank when freezing
conditions are present.
|Manufacturer Model #||CBV-075|