Adjustable Drip Emitter on Spike 180-Degree
- RELATED PRODUCTS
- DESCRIPTION
- SPECIFICATIONS
- FEATURES
- REVIEWS
The 180° and the 360° adjustable flow drip emitters have a flow range of 0 to 10 GPH at a preset pressure of 25 PSI. When the cap is rotated the adjustable drip emitter flow and the radius of the soaked area change from a drip to a gentle stream pattern to off. This feature allows the user to adjust the flow to each individual plant as needed. Twisting the dial on the drip emitter towards the "+" or the "-" signs allows the user to increase or decrease the flow rate. Our range of adjustable drip emitters come with 5" spike and 1/4" side barb inlet or with 1/4" barb inlet only. The ideal use for this range of adjustable drip emitters is for a group of plants or under a large individual plant.
Specification - Available: on 1/4" barb or 5" stake with barbed sleeve
- Drip emitter pattern : 180° or 360° coverage
- Flow rate: 0 to10 GPH
- Fully open : up to 3' diameter of coverage
- Materials: Body: Polpropylene
- Operating pressure: 10 to 30 PSI
- Recommended filtration: 150 mesh
- Recommended pressure: 25 PSI
- Streams : Four for the 180° and eight for the 360° coverage
Features - Can be taken apart for easy cleaning
- The adjustable head will take approximately 22 clicks to be fully open
- The barbed drip emitter installs into 1/4” micro tubing or into 1/2” drip tubing
- The stake drip emitter installs into 1/4” micro tubing only
- UV protected; manufactured from superior durable plastics for long life against degradation
