Kit Components
1 - PR004 - Pressure Regulator HT x HT
1 - A001 - 1/4" Microtube to 3/4" Hose thread connection
1 - T009 - 50 ft. 1/4" Black Vinyl Microtube
12 - S005 - 1/4" microtube stake
12 - D001 - 1 GPH pressure compensating drippers
11 - SF003 - 1/4" barbed Tee's
Installation Instructions
Expanding or starting with larger plants.
If you start with larger plants simply go to step 4 and after finishing step 4 place a 1/4" Tee at the end of the microtube and install short pieces of microtube on each end of that tee. The ends of these tubes should finish on opposite sides of the plant. Place a dripper on each microtube end then a stake next to the dripper and place them each in the soil where you want the water to come out.
Note: With a dripper on each side of the plant you will get a nice even watering for the root zone. If your plants are so large that they require more drippers around the plant you have many options on how to expand. You can get more 1/4" Tee's, Drippers and Stakes OR you can get 1/4" dripperline with 6" spacing and circle the entire plants root zone.
If you have questions......CALL US! 844-420-4100