Selling Online Since 1996!

844-420-4100

Phone Orders Welcome

Technical Support

Free Design Service!

All PVC Fittings and PVC risers are listed here.

1 - 16 of 79

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • PV112

    Heavy-Duty 1" FPT PVC Ball Valve with Union.

    Regular Price:

    $21.00

    Heavy-Duty 1" FPT PVC Ball Valve with Union / 1" FPT X 1" FPT
    Heavy-duty, high quality, 1 inch PVC ball valves with EPDM seals for watertight operation. All metal parts are isolated from the water flow, providing for highly corrosion-resistant operation.

    Everyone has ball valves so we decided to sell the best and most durable we could find.

    Not only that they come with a union on each side so installing them allows you to make repairs on either side of this valve without turning off your water supply.

    Formerly Part# A145


  • PV111

    3/4" True Union PVC Ball Valve with Threaded and Socket Connections.

    Regular Price:

    $18.00

    Heavy-duty, high quality, 3/4 inch PVC ball valves with EPDM seals for watertight operation.

    Well we have found what we think is a great true union ball valve for our customers. We really like how it feels and works. Best of all this valve COMES WITH both threaded and PVC socket ends! That's right. No worries of which connection you might end up needing. It's like getting two ball valves for the price of one!

    True commercial quality for use in industrial, water treatment, pool/spa, irrigation and commercial plumbing applications. For fluid handling only! Do not use with compressed air or gas!

    Formerly Part# A144

  • PV110

    Heavy-Duty 1/2" FPT PVC Ball Valve with Union.

    Regular Price:

    $12.00

    Heavy-Duty 1/2" FPT PVC Ball Valve with Union / 1/2" FPT X 1/2" FPT 
    Heavy-duty, high quality, 1/2 inch PVC ball valves with EPDM seals for watertight operation. All metal parts are isolated from the water flow, providing for highly corrosion-resistant operation.

    Everyone has ball valves so we decided to sell the best and most durable we could find. Not only that they come with a union on each side so installing them allows you to make repairs on either side of this valve without turning off your water supply.

    Formerly Part# A143

  • A123

    3/4" FPT x 1/2" (17 mm) Barbed Ball Valve

    Regular Price:

    $2.86

    The 3/4” female pipe thread (FPT) x 1/2” barb ball valve is used as on/off valve for a drip tubing or drip line lateral. The ball valve can be used with individual 1/2” drip tubing with .700 OD and 17 mm drip line with a .670 OD.

    We make this ourselves out of three different products because no manufacturer produces this item. We got asked quite a bit for this configuration and instead of telling people to buy three different items we assemble them ourselves and sell it as one product.

  • PV103

    1" PVC Ball Valve / Slip x Slip

    Regular Price:

    $7.00

    1" PVC Ball Valve / Slip x Slip

    This ball valve comes in handy when you need to isolate sections of your irrigation supply line for maintenance. We always recommend to install a ball valve before any automated valve manifold which controls your irrigation zones.

    If you need to replace a valve, repair a valve or move a valve having one of these before the manifold is worth every penny.

  • PV102

    3/4" PVC Ball Valve / Slip x Slip

    Regular Price:

    $5.00

    3/4" PVC Ball Valve / Slip x Slip

    This ball valve comes in handy when you need to isolate sections of your irrigation supply line for maintenance. We always recommend to install a ball valve before any automated valve manifold which controls your irrigation zones.

    If you need to replace a valve, repair a valve or move a valve having one of these before the manifold is worth every penny.

  • PV101

    1/2" PVC Ball Valve / Slip x Slip

    Regular Price:

    $4.10

    1/2" PVC Ball Valve / Slip x Slip

    This ball valve comes in handy when you need to isolate sections of your irrigation supply line for maintenance. We always recommend to install a ball valve before any automated valve manifold which controls your irrigation zones.

    If you need to replace a valve, repair a valve or move a valve having one of these before the manifold is worth every penny.

  • P415

    PVC Adapter 2" MPT X 2" Socket

    Regular Price:

    $1.30

    A 2" adapter going from MPT to 2" PVC pipe.

    If you need to step down to 1", 3/4" or 1/2" PVC pipe then check below the pictures for the related products. We have bushing that slip right into this fitting.

    P411 for 1/2" PVC pipe
    P412 for 3/4" PVC pipe
    P413 for 1" PVC pipe

  • A132

    1/2" MPT Triple Elbow

    Regular Price:

    $1.29

    Made of durable black plastic, the triple elbow with 1/2" male pipe thread is used to add flexibility when installing a sprinkler or multi outlet drip emitter with 1/2" FPT base by providing adjustment of height and position to the device installed.

    We like to call these "Magic"! We use them to connect multi-outlet manifolds to PVC Tees which had 1/2"  sprinkler risers attached. We take out the sprinkler riser, install one of these and then the manifold. This helps keep the manifold near ground level.

  • P503

    1" x 18" Flexible PVC Coupling

    Regular Price:

    $7.10

    This Flexible coupling from Dura Plastics is just the ticket for landscape irrigation repair. Broken pipes at odd angles or buried pipes you cannot move to put in a solid PVC pipe. Going over roots or rocks and the list goes on!

    This 18" long coupling will allow you to repair quickly any break in PVC and best of all you do not need any other fittings as the ends have built in slip couplings for the rated size.

    BONUS ALERT: The ends not only serve as couplings for the rated size (1" goes over 1" PVC pipe) but they also work to go inside fittings the next size up! Yup, the 1/2" ends will fit into 3/4" fittings, the 3/4" ends go inside 1" Fittings and the 1" ends fit into 1-1/4" fittings.

    Not to be used in constant pressure applications!

  • P502

    3/4" x 18" Flexible PVC Coupling

    Regular Price:

    $6.00

    This Flexible coupling from Dura Plastics is just the ticket for landscape irrigation repair. Broken pipes at odd angles or buried pipes you cannot move to put in a solid PVC pipe. Going over roots or rocks and the list goes on!

    This 18" long coupling will allow you to repair quickly any break in PVC and best of all you do not need any other fittings as the ends have built in slip couplings for the rated size.

    BONUS ALERT: The ends not only serve as couplings for the rated size (3/4"" goes over 3/4"" PVC pipe) but they also work to go inside fittings the next size up! Yup, the 1/2" ends will fit into 3/4" fittings, the 3/4" ends go inside 1" Fittings and the 1" ends fit into 1-1/4" fittings.

    Not to be used in constant pressure applications!

  • P501

    1/2" x 18" Flexible PVC Coupling

    Regular Price:

    $4.75

    This Flexible coupling from Dura Plastics is just the ticket for landscape irrigation repair. Broken pipes at odd angles or buried pipes you cannot move to put in a solid PVC pipe. Going over roots or rocks and the list goes on!

    This 18" long coupling will allow you to repair quickly any break in PVC and best of all you do not need any other fittings as the ends have built in slip couplings for the rated size.

    BONUS ALERT: The ends not only serve as couplings for the rated size (1/2" goes over 1/2" PVC pipe) but they also work to go inside fittings the next size up! Yup, the 1/2" ends will fit into 3/4" fittings, the 3/4" ends go inside 1" Fittings and the 1" ends fit into 1-1/4" fittings.

    Not to be used in constant pressure applications!

  • A134

    1/2" FPT Coupling

    Regular Price:

    $0.30

    1/2" FPT Coupling

    Comes in handy for many conversions of PVC to thread or for some head assembly parts.

  • LF344

    1" Barb x 1" Socket For PVC

    Regular Price:

    $1.64

    This barb end pushes right into our 1" poly tube or any poly tube with an I.D. of 1.06. The other end is a 1" Socket which will accept any 1" Sch 40 PVC pipe. Use normal PVC glue.

    Tubing acceptable ID: 1.035 to 1.075 
    glass-reinforced polypropylene 

  • A042

    Teflon Tape / 1/2" x 520"

    Regular Price:

    $1.77

    When installing an irrigation system using PVC threaded fittings you should use two or three wraps of this teflon tape on the male ends. Not only does it help seal against any water leaks it allows for a smooth threading together of parts. Even better it lets you UNscrew parts if needed, now and in the future! If you think we are kidding try for yourself and test with and without................told you! :-)

  • P433

    Schedule 40 PVC 1" SPG x 1" MPT

    Regular Price:

    $0.85

    This 1" Spigot x 1" MPT fitting is used to create a threaded fitting from a 1" Sch 40 socket. Make any 1" slip fitting to a 1" MPT adaptor. 

1 - 16 of 79

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5