Any of our 3/4" size poly tubing will work with any fitting listed as 3/4" in size.
We carry the following styles of 3/4" fittings:
Regular Price: $4.90$4.90
This Tee will allow you to connect to a garden hose or a hose faucet as a water source. More likely with 3/4" tubing you may want to use this to have a connection in your 3/4" irrigation line for hooking up a garden hose! If you want to do that get this nipple to place in the tee and then your garden hose will connect just like a hose faucet.
If you get the nipple above AND the automatic flush valve you can have a mid line flush valve!
Regular Price: $1.13$1.13
Use this to connect our 3/4" poly tube to a 3/4" FPT.
This is the fitting used to connect rows of 3/4" tubing to a larger PVC mainline by installing PVC Tees with a 3/4" FPT side outlet like ourP420 or P405 listed below in the "Related Products" section.
Regular Price: $9.00$9.00
The A154 3/4" swivel brass hose end "Y" shut-off valve ball valve control two outlets from a 3/4" faucet or garden hose. Connect the 3/4" FHT "Y" ball valves to the end of a standard 3/4" faucet or to the end of a garden hose.
Regular Price: $15.00$15.00
The 3/4" female hose swivel thread inlet five ports plastic valve manifold with 3/4" outlets is used for multi outlet connections to a garden hose and a drip system from the same faucet or spigot outlet.
TIP: We strongly suggest to have this lay on the ground by connecting it to a hose faucet with a short piece of garden hose. If you try to hang it from a hose faucet the weight may break the hose faucet.
Regular Price: $0.48$0.48 As low as: $0.47
Figure "8" Hose End for 3/4" Drip Tubing
Put one end of tubing through an opening, fold the tube over and slide the tubing back out with the folded over end going through the open hole. Makes opening the tubing end easy for flushing or draining before winter.
Regular Price: $4.00$4.00 As low as: $3.92
3/4" FHT x 3/4" FPT Brass Swivel Connector
Sometimes going between pipe thread and hose thread you just have a hard time making things work / connect how you want them. Well let me introduce you to "My little friend"! This fitting and the A010 (PT to HT nipple, listed below in "Related Products") sort of ease the pain. When installing systems there are about ten fittings I like to have in the bag and this is one. Saves you from running to the store....AGAIN! For a plastic version get the A155.
Regular Price: $2.25$2.25 As low as: $2.21
3/4" Swivel Adapter FHT x FPT
Sometimes going between pipe thread and hose thread you just have a hard time making things work / connect how you want them. Well let me introduce you to "My little friend"! This fitting and the A010 (PT to HT nipple, listed below in "Related Products") sort of ease the pain. When installing systems there are about ten fittings I like to have in the bag and this is one. Saves you from running to the store....AGAIN! For a brass version get the A165.
(Pssst......the BLUE side are the hose threads)
3/4" FHT End Cap
Combine this with an LF082 to make a custom end cap for 1/2" (.700 OD) tubing. Shown below in "Related Products" or to cap off any 3/4" MHT fitting temporarily if needed. If you use a garden hose to connect to you drip system use this and the LF023 to cap it off when the garden hose is not attached. This keeps out debris and bugs!
Regular Price: $0.87$0.87 As low as: $0.85
3/4" FPT Coupling
A common coupling used in irrigation. You will most often see this used on head assemblies where you need to connect a filter with a male thread to another item with male threads. You could use a white PVC fitting but it would stand out with all the black parts of a drip head assembly.
Regular Price: $1.06$1.06 As low as: $1.04
3/4" FHT x 3/4" MPT Swivel Adapter
If for some reason you want to connect a garden hose to PVC this is the fitting to start with.
Check the "Related Products" section below left for the other fitting needed to go from garden hose to PVC.