Selling Online Since 1996!

844-420-4100

Phone Orders Welcome

Technical Support

Free Design Service!

All of our solid 1/2" tubing will work with any fitting we have listed as 1/2" in size. The same applies for our 3/4" and 1" fittings.

We carry the following styles:

  • Spin-Loc
  • Compression
  • Barbed
  • Universal Nut Lock

1 - 16 of 51

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • A135

    1/2" FPT Adapter with 1/4" Barbed Tee

    Regular Price:

    $0.61

    This 1/2 inch FPT adapter with 1/4 inch barbed tee allows you to run a 1/4 inch dripperline or 1/4 inch micro tube in two directions from an 1/2 inch sprinkler riser. 

  • LF030

    Compression Ball Valve for .700 OD Poly Tubing

    Regular Price:

    $1.79

    This ball valve with compression ends is used as an on/off valve for a .700 OD poly drip tubing. The ball valve should only be used with .700 OD poly tubing.

    Ball valves are great to isolate rows, beds, growing tables or greenhouses. Anywhere you have 1/2" poly tube this can be installed.

  • A007

    Barbed Ball Valve for .700 or 17mm OD Poly Tube

    Regular Price:

    $1.97

    This barbed ball valve is used as an on/off valve for a drip tubing or drip line lateral. The ball valve can be used with any poly tubing of .700 OD or our 17 mm drip line.

    Ball valves are great to isolate rows, beds, growing tables or greenhouses. Anywhere you have 1/2" poly tube this can be installed.

  • A134

    1/2" FPT Coupling

    Regular Price:

    $0.30

    1/2" FPT Coupling

    Comes in handy for many conversions of PVC to thread or for some head assembly parts.

  • R202

    1/2" MPT X 2" length Schedule 80 PVC Nipple

    Regular Price:

    $0.24

    1/2" MPT X 2" length Schedule 80 PVC Nipple

  • A006

    Figure "8" Hose End for 1/2" Drip Tubing

    Regular Price:

    $0.13 As low as: $0.11

    Figure "8" Hose End to close off all sizes of 1/2" Drip Tubing.

    Simply insert tube in one hole then fold over tube and place the folded over end through the open hole.

  • LF515

    1/2" barb Tee X 3/4" FPT for 17mm or .700 OD Poly Tube.

    Regular Price:

    $1.40 As low as: $1.33

    1/2" barb Tee X 3/4" FPT for 17mm or .700 OD Poly Tube.

    <p>These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.</p><p>It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.</p><p>17mm fittings work with our 1/2" &nbsp;(.700 OD) solid poly tube.<br>17mm fittings work with any poly tube that has an ID of .550 to .600<br>16mm fittings work with any poly tube that has an ID of .520 to .540</p>

  • LF321

    1/2" barb Tee X 3/4" MPT for 17mm or .700 OD Poly Tube.

    Regular Price:

    $0.55 As low as: $0.52

    1/2" barb Tee X 3/4" MPT for 17mm or .700 OD Poly Tube.

    Use this fitting to tap into a PVC main line where you have a PVC Tee with a 3/4" FPT outlet. From there you can run laterals of 17mm dripperline in both directions.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF318

    1/2" Starter Barb Connector to Poly pipe for 17mm Dripperline or our .700 OD Poly Tube

    Regular Price:

    $0.29 As low as: $0.28

    1/2" Starter Barb Connector to Poly pipe for 17mm Dripperline or our .700 OD Poly Tube

    When using 1/2", 3/4" or 1" solid poly tube you can easily connect laterals of dripperline with this connector by punching a hole in the solid main line with a special punch model A036 listed below in the "Related Products" section.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF317

    1/2" Barb Y X 3/4" MPT for 17mm Dripperline or our .700 OD Poly Tube

    Regular Price:

    $1.04 As low as: $0.99

    1/2" Barb Y X 3/4" MPT Works with any of our 17mm Dripperline or our .700 OD poly tube.

    Another way to come off a PVc main line to poly tube or dripperline. Connects to any 3/4" FPT connection.


    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF316

    1/2" Barb Cross for 17mm Dripperline or our .700 OD Poly Tube

    Regular Price:

    $1.04 As low as: $0.99

    1/2" Barb Cross Works with any of our 17mm Dripperline or our .700 OD poly tube.

  • LF315

    1/2" Starter Barb Connector with Rubber Grommet for 17mm Dripperline or our .700 OD Poly Tube

    Regular Price:

    $0.92 As low as: $0.87

    1/2" Starter Barb Connector with Rubber Grommet for 17mm poly tubing.

    When you need many lines coming off a large PVC mailine rather than installing multiple PVC Tees you just drill a hole and insert one of these.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF313

    1/2" Barb Elbow X 1/2" MPT for 17mm and .700 OD tubing

    Regular Price:

    $0.50 As low as: $0.48

    1/2" Barb Elbow X 1/2" MPT for 17mm and .700 OD tubing.

    Great for connecting to a PVC main line and running dripperline in a single direction. Just use a PVC Tee with a 1/2" FPT outlet.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF311

    1/2" Barb Connector X 3/4" MPT for 17mm and .700 OD tubing

    Regular Price:

    $0.58 As low as: $0.55

    1/2" Barb Connector X 3/4" MPT for 17mm and .700 OD tubing.

    Great for connecting to a PVC main line and running dripperline in a single direction. Just use a PVC Tee with a 3/4" FPT outlet.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.

    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.
    17mm fittings work with any poly tube that has an ID of .550 to .600
    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF309

    1/2" Barb Connector X 1/2" MPT for 17mm and .700 OD tubing

    Regular Price:

    $0.50 As low as: $0.48

    1/2" Barb Connector X 1/2" MPT for 17mm and .700 OD tubing.

    Great for connecting to a PVC main line and running dripperline in a single direction. Just use a PVC Tee with a 1/2" FPT outlet.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.


    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.

    17mm fittings work with any poly tube that has an ID of .550 to .600

    16mm fittings work with any poly tube that has an ID of .520 to .540

  • LF307

    1/2" Barb Tee X 1/2" MPT for 17mm and .700 OD tubing

    Regular Price:

    $0.50 As low as: $0.48

    1/2" Barb Tee X 1/2" MPT for 17mm and .700 OD tubing. 

    Great for connecting to a PVC main line and running dripperline off in both directions. Just use a PVC Tee with a 1/2" FPT outlet.

    These barbed fittings are color coded the same as the dripperline they work with. If you are purchasing the 16mm, black then use the 16mm black fittings. The 17mm brown line then the 17mm brown fittings.

    It's a great way to connect dripperline as the fittings go inside the tubing and almost disappear once installed and nothing to get hung up on if moving the lines. Great for the visual in landscape situations.


    17mm fittings work with our 1/2"  (.700 OD) solid poly tube.

    17mm fittings work with any poly tube that has an ID of .550 to .600

    16mm fittings work with any poly tube that has an ID of .520 to .540


1 - 16 of 51

Page:
  1. 1
  2. 2
  3. 3
  4. 4