Selling Online Since 1996!

844-420-4100

Phone Orders Welcome

Technical Support

Free Design Service!

4 Outlet

The Four Outlet PC Drip Manifold is designed to convert a 1/2" sprinkler riser into a drip irrigation system, applying less water than the conventional sprinkler head it replaced.

Use with our 1/4" microtube and then use a 1/4" stake to keep the tube in place.

6 Item(s)

  • D041

    6 GPH Four Outlet Drip Manifold with 1/2" FPT (BLACK)

    Regular Price:

    $2.44 As low as: $2.25

    6 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" Barbs (BLACK)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.
    At 6 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. You can also run the 1/4" microtube to a plant and then connect 1/4" dripperline to encircle the root zone of the potted plant. See the installation instuctions below.

  • D040

    2 GPH Four Outlet Drip Manifold with 1/2" FPT (BLUE)

    Regular Price:

    $2.44 As low as: $2.25

    2 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" Barbs (BLUE)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.

    At 2 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. See the installation instuctions below.

  • D039

    6 GPH Four Outlet Drip Manifold with 1/2" FPT (BLACK)

    Regular Price:

    $2.44 As low as: $2.25

    6 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" Barbed Elbows (BLACK)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.
    At 6 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. You can also run the 1/4" microtube to a plant and then connect 1/4" dripperline to encircle the root zone of the potted plant. See the installation instuctions below.

  • D038

    2 GPH Four Outlet Drip Manifold with 1/2" FPT (BLUE)

    Regular Price:

    $2.44 As low as: $2.25

    2 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" Barbed Elbows (BLUE)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.

    At 2 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. See the installation instuctions below.

  • D036

    12 GPH Four Outlet Drip Manifold with 1/2" FPT (RED)

    Regular Price:

    $2.44 As low as: $2.25

    12 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" barbed elbows (RED)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.

    At 12 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. You can also run the 1/4" microtube to a plant and then connect 1/4" dripperline to encircle the root zone of the potted plant. See the installation instuctions below.

  • D037

    12 GPH Four Outlet Drip Manifold with 1/2" FPT (RED)

    Regular Price:

    $2.44 As low as: $2.25

    12 GPH Four Outlet Drip Manifold with 1/2" FPT & 1/4" Barbs (RED)

    An easy way to convert a 1/2" sprinkler riser to a drip manifold. Great if you have potted plants. Simply run 1/4" microtube from the barbed outlet to your plant and use a stake (S003) to hold it in place.
    At 12 GPH per outlet you can even split off each outlet to multiple plants using a flow restricting stake listed below left in the "Related Products" section. You can also run the 1/4" microtube to a plant and then connect 1/4" dripperline to encircle the root zone of the potted plant. See the istallation instuctions below.

6 Item(s)