360- Degree Adjustable Mini Bubbler on 6" Stake / 0-35 GPH
Click to Enlarge
RELATED PRODUCTS
DESCRIPTION
SPECIFICATIONS
FEATURES
REVIEWS
The umbrella mini bubbler is an adjustable high flow emission device available on stake with 1/4" barb inlet. The adjustable bubblers can be extended from the 1/2" drip tubing using 1/4" micro tubing. The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.
Specification
Adjustable flow rate: 0 GPH to 35 GPH
Operating pressure: 15 to 30 PSI
Pattern: 360 degree agentle umbrella pattern
Number of clicks: 0 to 22
Diameter of throw: up to .7 to 1.8 feet @15 to 30 PSI
Flow rates at pressure of 15 PSI when fully open: 27 GPH
Flow rates at pressure of 20 PSI when fully open: 30 GPH
Flow rates at pressure of 30 PSI when fully open: 35 GPH
Available with barb or 5 inch stake
Materials: Polyethylene
as configured:
Features
360-degree adjustable pattern:
Can be taken apart for easy cleaning :
Fingertip low control can be adjusted from 0 to 35 GPH with a shut off option:
The barbed bubbler Install into a 1/4" micro tubing or on to a 1/2" drip tubing:
The stake bubbler Install into a 1/4" micro tubing or only :
UV protected; manufactured from superior durable plastics for long life against degradation: